Main configuration window
Select by clicking on each flip

Here you can configure how often (if) you want to log the readings
The logfiles are created in the subdirectory DATA, and are named <monthnumber><year>.txt

It's possible to log each temperature sensor separatly, set the value named Log=1 in each sensors section in SENSORS.INI.
(Will log to a file named <sensordescription><monthnumber><year>.txt)

Select units for wind, rain and temperature.

Select enabling and which port to use for TCP clients.

Select enabling and which port to use for UDP clients.

Select enabling and which port to use for integrated WEB-server.(WWW display of current status)

Select enabling and which port to use for status log broadcast.(broadcasts status log using UDP)

Select what background color to use on the graphs.

Select automatic reset of the raingauge total every new month.

Select time for the daily reset.

Select which temperature sensor to be used for posting/display on status page.

Select to write a 2-line summary at specified intervals, (SUMMARY.TXT)
Thanks to Andrew Davidson from the APRS community for the specification, the format is as follows:

Aug 28 2000 09:35
240/005g010t058P110

The first line is the date and time the readings were taken, the second line is:

wind direction - 240 degrees

average wind speed - 5 knots

wind gust - 10 knots

temperature - 58F

precipitation since midnight - 110 * 0.01 inches = 1.1 inch

The units are fixed, no change in the software is available.